★ 3,066 Google reviews
Local plumbers in Norfolk, Winchester & Wilmington

Whole house repiping for older homes and tired pipes.

Leaks that keep coming back, rusty water or low pressure? A repipe replaces old supply lines throughout the house, planned and priced before we start.

Available in: Norfolk, Winchester & Wilmington

New PEX water lines and a manifold installed during a whole house repipe
Whole-home repiping

“We just fixed a leak, and now there's another one.”

When pipes fail one after another, it's usually the pipe itself, not bad luck.

Older homes often still have galvanized steel, polybutylene or corroded copper lines. They narrow, rust and leak with age. Our Norfolk branch works on older homes with cast iron and galvanized pipe all the time, and every branch does repipes.

A whole house repiping project replaces the supply lines from the main to each fixture. Your plumber explains the options and gives you a written price before any wall is opened.

  • Leaks that keep coming backThe pipe is wearing out
  • Low pressure through the houseNarrowed old pipe
  • Rusty or discolored waterCorroding galvanized lines
  • Older home, original plumbingGalvanized or polybutylene
  • Remodeling anywayBest time to replace lines
Pipes we replace

What's in your walls, and how it holds up

Older homes in our area often have one or more of these. Here's why each one fails, and what we put in instead.

Replace

Galvanized steel

Common in older homes. It rusts from the inside, narrowing the pipe until the pressure drops and the water runs brown.

Replace

Lead

Found in some very old homes and service lines, and no longer allowed for drinking water lines. If we find it, we'll show you and plan to replace it.

Replace

Polybutylene

Gray plastic pipe used from the late 1970s to the mid 1990s. It's known to crack and fail at the fittings without warning.

Repair or replace

Copper

Long-lasting, but older copper can develop pinhole leaks. A few spots can be repaired. Leak after leak usually means it's time.

What we install

PEX-A

Flexible, so it bends around corners with fewer fittings, and it's more forgiving in a freeze than rigid pipe.

What we install

PEX-B

A little stiffer and lower in cost than PEX-A. Both are proven, and your plumber will explain which suits your home and budget.

How the visit goes

What happens when you book

The same steps on every visit, so you always know what's next.

  1. You book

    Online or by phone. We tell you the trip fee before we book.

  2. We confirm

    A confirmation, a reminder, then an “on the way” notice.

  3. At your door

    Uniform, ID badge, marked truck, shoe covers and drop cloths.

  4. We find it

    Your plumber finds the cause and explains your options in plain English.

  5. You approve

    A written, flat-rate price, signed before work starts.

  6. Done and cleaned up

    Photos of the finished work come with your invoice.

How pricing works

You see the price before we start.

No surprise bill. You approve a written price first.

Financing on jobs of $500 or more
  1. Trip fee quotedWe tell you the fee when you book, before anyone is sent.
  2. Written priceYour plumber gives you a flat-rate price for the job.
  3. You approveTake a minute, ask questions, then sign off.
  4. We startThe price doesn't go up if the job takes longer.
Repair or repipe

When does a repipe make sense?

We'll tell you honestly whether a repair will hold or whether you'd be paying for the same fix again.

PEX manifold with labeled supply lines
If it's one spot

Repair the section

One failed fitting or a short run of bad pipe can usually be repaired or replaced on its own.

We won't push a repipe when a repair will do.

Opened walls during a renovation, ready for new plumbing
If it's the whole system

Repipe the house

We plan the route, open only what we need, run new lines and test everything before walls close.

In-home estimates are free, and financing is available.

What affects the price

  • The size of the home and number of fixtures
  • Pipe material: PEX or copper
  • How much wall and ceiling has to be opened
  • Patching and restoring the openings
Repiping reviews

Older homes, new pipes

4.8
★★★★★
3,066 Google reviews · 3 branches
New PEX supply lines and manifold
From our Norfolk team
There are a lot of companies in our area that will look up your ZIP code and not even go out and work on them due to the age of the home. When they can't do that, we swoop in.
Sean, service manager, Norfolk
3,066

Google reviews across our three local branches.

93% of them are five-star.

Old pipes that keep leaking?

Book a free in-home estimate. You'll get your options and a written price before we start.

Find your nearest Powell's branch →

Repiping FAQs

Questions about repiping a house

Cost, timing and whether it's worth it.

How much does it cost to repipe a house? +

It depends on the size of the home, the number of bathrooms and fixtures, the pipe material, and how much wall and ceiling has to be opened. We give you a written price after a free in-home estimate, before any work starts.

How long does repiping a house take? +

It depends on the home. Your plumber will give you a schedule with the estimate, and we'll tell you when the water will be off each day.

Is it worth it to repipe a house? +

If you're fixing leak after leak, or the water is rusty or the pressure is poor, a repipe usually costs less over time than repeated repairs and water damage. If it's one bad section, a repair is the better call, and we'll tell you so.

PEX or copper: which is better? +

Both last. PEX is flexible, quicker to run through finished walls and usually costs less. Copper is rigid and long-proven. Your plumber will explain which suits your home and budget.

Can I finance it? +

Yes. Financing is available through Wisetack on jobs of $500 or more. You can check your options from home in a couple of minutes. All financing is subject to credit approval.

(540) 665-8196 Book Online